Description
Two-component, transparent synthetic resin that does not yellow. Measure component A and B in a 1:1 volume ratio and mix well. For coloring, use resin colorants for the cover and media inks for the transparent colors. You can also mix art mica or metallic pigment powder into the mixture, so you can achieve a metallic, shiny effect. The mixture can be poured directly onto the surface or poured into a silicone mold. The product is basically recommended for smaller objects and castings. If you use a mold, the thickness of the poured amount can be a maximum of 20 mm. If you want a thicker object, you can achieve it by casting several layers. The poured object can be removed from the mold after 24 hours of drying, which is still flexible at this time. The total drying time is 72 hours, after which the material becomes very hard and resistant. You can mix smoke foil, galaxy flakes, colored foil flakes and spray beads with the resin. You can wash the tools with rubbing alcohol, and the alcohol also helps to eliminate any air bubbles that may form. You can also remove the bubbles with a cooking torch. The hardened resin can be sanded and polished.
